优势
节能:通径结构设计保证最小压损
较少过程测量点:多参数测量(流量、密度、温度)
节省安装空间:无前/后直管段长度要求
完整查看过程信息和诊断信息:提供多种用户自定义输入/输出组合方式和现场总线
降低复杂性和多样性:用户自定义输入/输出功能
自带验证功能:内置Heartbeat Technology (心跳技术)
仪表特点 自排空的单直管测量系统 TMB 技术 测量管材质:钛 分体式仪表,最多带4路输入/输出 背光显示,触摸键控制和WLAN访问 传感器和变送器通过标准电缆连接 测量原理不受流体物理特性的影响(例如:粘度和密度)。 在低压损要求和敏感性流体测量应用中进行液体和气体测量。 Density/Concentration 气体 粘度 密度 液体 科里奥利质量流量 Combines in-line viscosity and flow measurement with a transmitter remote version with up to 4 I/Os. Measuring liquids and gases in applications requiring low pressure loss and gentle fluid treatment. Energy-saving – full bore design enables minimal pressure loss. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space-saving installation – no in/outlet run needs. Straight, easy-to-clean single-tube system. TMB technology. Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology. Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access. DN 8 to 80 (⅜ to 3") Measuring tube: Titanium grade 9 Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration, viscosity Mass flow (liquid): ±0.10 % 0 to 180 000 kg/h (0 to 6600 lb/min) PN 100, Class 600, 63K –50 to +150 °C (–58 to +302 °F) Standard: –40 to +60 °C (–40 to +140 °F) 1.4301 (304), corrosion resistant AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; Polycarbonat Sensor remote version (standard): IP66/67, type 4X enclosure 4-line backlit display with touch control (operation from outside) 4 outputs: Status input HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA DC 24 V ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC CE, C-tick, EAC marking Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511 Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025) PED, CRN 3.1 material 3-A, EHEDG, cGMP应用领域
特征和规格
测量原理
产品标题
传感器特点
变送器特点
公称口径范围
接液部件材质
Connection: Titanium grade 2测量变量
最大测量误差
Volume flow (liquid): ±0.10 %
Mass flow (gas): ±0.50 %
Density (liquid): ±0.0005 g/cm³测量范围
最大过程压力
介质温度范围
环境温度范围
Option: –50 to +60 °C (–58 to +140 °F)传感器外壳材质
Sensor connection housing (standard): AlSi10Mg, coated
Sensor connection housing (option): 1.4301 (304); 1.4404 (316L); 1.4409 (CF3M) similar to 316L变送器外壳材质
防护等级
Sensor remote version (option): IP69. Transmitter remote version: IP66/67, Type 4X enclosure显示/操作
Configuration via local display and operating tools possible输出
4-20 mA HART (active/passive)
4-20 mA WirelessHART
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output输入
4-20 mA input数字通信
电源
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)防爆认证
产品安全性
功能安全性
计量认证和证书
Heartbeat Technology complies with the requirements for traceable verification according to ISO 9001:2008 – Section 7.6 a (TÜV attestation)压力认证和证书
材料证书
卫生型认证和证书